Consider these common measurements and tile design tips:
Kitchen Backsplash: Usually around 18″ high but lengths vary greatly. An average kitchen splash length is 10-20 lineal feet = 15-30 square feet of space to be tiled.
Tub Surround: For a standard tub, the wall lengths are usually 36″, 60″, 36″ = 11 lineal feet x 6′ or 7′ wall height (approx) = 66-77 square feet of tile needed.
Wainscot: Tile wainscoting is a great look, but what height should it be? For the best possible result, never cut the wall in half. This is one of the most important wainscot tips. If the wall is 8′ high, you want the total wainscot height below or above 48″. Consider 36″, 42″or 54″ from the floor to the top of the wainscoting.
Border: If you’re looking for a horizontal border or decorative stripe, take the lineal measurements given above. What about the height to place it at? That’s personal preference. At the top of wainscoting is good (not to exceed the total height listed above) or in a shower, 5′ is a great height. It doesn’t interfere with the plumbing locations yet is near eye level. For a unique and more contemporary look, place the border vertically and run the border from floor (or tub) to ceiling.
Fireplace: Designs vary, but you should consider whether you are tiling just the face of the fireplace, between a wood mantle and the firebox, or all the way around a fireplace, including the hearth and sides. Check out this fireplace for example: a total of 14 square feet (in 1×1, 1×2 and 2×4) of laNeva tile #90 Oregano.
Still can’t decide what would look best? Call or email email@example.com and we’d be thrilled to provide a phone consultation and custom layout options for you, including lots of tips on how to make your tile project a complete showstopper! We’ve been designing dynamic tile environments for… well, forever! (Okay, it’s been about 13 years.)